DIY REPURPOSED WOOD BACKDROP

elah-tree-photography-business-tips.jpg

One of my favorite backdrops for styled stock photography and brand photography is my repurposed wood backdrop. I built it last spring and it remains to be a constant in my work. One of the great things about backdrops like this one is that if you can find old pallet wood, you can build a repurposed wood back drop for FREE. :)

SUPPLIES

  • Old pallet
  • Circular saw
  • Hammer
  • Mallet
  • Drill
  • Screws

METHOD

STEP ONE : If you're familiar with pallets, you'll know that the base of the pallet is made up of three parallel 2x4s that secure the pallet. The first step in building anything with pallet wood is disabling the pallet. I had two options. I could dismantle the whole pallet with a hammer and mallet. Or I could use the circular saw to remove the two end pieces and only have to dismantle the center 2x4 with the hammer and mallet.  I chose the second option. Using a straight edge and pencil mark a line for where you will make your cut. Use your circular saw to cut along your marked edge. Repeat this step on the other side of the pallet. When your finished with this step you should have one remaining 2x4 in the center of the pallet.

STEP TWO : This step takes the most muscle and patience. ;) Using your hammer and mallet gently pry away the remaining 2x4 from the pallet wood. This must be done gently so that you don't crack or break any of the wood. We tried lots of different techniques when removing the wood. We pried the wood away with the hammer. We used the mallet to loosen the wood and nails. We even stood on the wood and used our body weight. Any technique will work as long as your wood doesn't break.

STEP THREE : Once all your wood is free you can begin building. For my backdrop I decided to use the back side of the pallet wood because it was more rustic and had more character. We laid the pieces out to ensure we liked the design, then flipped the boards over. We used spare wood pieces and other pallet pieces to secure the backdrop together. Using your drill and screws attach the boards on the back. The most important part of this step is simply to make sure the boards on the back span your backdrop so each piece is secure.

elah-tree-product-photography-13.jpg

Once you're finished you can can use your backdrop for all types of things. You can use it for flatlay photography or stand it on it's side and use it as a background. xoxo! Samantha